MBT

Multi-Band Video Transmitter (MBT)

OVERVIEW

The MBT is a hand-held unit that transmits real-time, full-motion video. Designed to work over the L,S and C bands. It can be used to test all bands of the MVR-IV video receiver or any other video receiver. It can be operated stand-alone using the built-in keypad and LCD display or controlled via a computer.

  • Covers L, S, and C bands

  • Hand-held transmitter

  • Test all bands on any video receiver

  • Operated stand-alone or via computer

SPECIFICATIONS

rf characteristics
Frequency Ranges 1700 to 1850 MHz, 2200 to 2500 MHz, 4400 to 5000 MHz, 5250 to 5858 MHz
Frequency Resolution 1 MHz
Frequency Selection Direct User Entry, Programmable Presets, Auto Sweep Up, Down
Band Selection Automatic
Power Output +24 dBm (250mW)
Output Impedance 50 Ω
2nd Harmonic -50 dBc
Frequency Control Phase-locked to TCXO
Frequency Stability 0.0001% (1ppm)
Type of Modulation FM
Transmit Bandwidth 18 MHz
Load Mismatch Infinite no damage, all angles
video
Input Level 1 Vp-p (NTSC)
Input Impedance 75 Ω
Bandwith 4.5 MHz
Channel Capacity 1
Internal Camera 1/4" color CMOS pin-hole
power requirements
Input Voltage +8.0 VDC min., +14 VDC max.
Current Draw 450 mA nominal at 9V
350 mA nominal at 12V
Battery Thales 12V Lithium Battery Pack or 9V 123 Battery Adapter
Battery Life 12 hours nominal at 12V
Reverse Polarity Protected
environmental specifications
Operating Temp -10 to +60 degrees C minimum
Altitude Unlimited
mechanical specifications
Size 1.5" x 2.6" x 9.3" (excluding connectors or switches)
Weight Approx. 2.0lb (with batteries)
connectors
RF TNC female
Video Input 75 Ω BNC female
Programming 10-pin header

ACCESSORIES

DOWNLOAD BROCHURE

 alt tag MBT Overview

The MBT is a hand-held unit that transmits real-time, full-motion video. Designed to work over the L, S & C bands. It can be used to test all bands of the MVR-IV video receiver or any other video receiver.